Model | HD3-1500 | |
Die cutting type | Pressed flat die cutting(Lower side is movable while upper side is unmovable) | |
Max paper transmitting size | 1510*1120mm | |
Min paper transmitting size | 450*500mm | |
Max die cutting size | 1490*1100mm | |
Min gripper size | 8mm | |
Max die cutting pressure | 400N/cm² | |
Paper processed | Ivory board | 0.1-0.3mm |
Corrugated board | Less than 8mm | |
Die cutting precision | ±0.1mm | |
Max die cutting speed | 4600sheets/h | |
Max feeding pile height | 1400mm(above the level) | |
Min feeding pile height | 1250mm(above the level) | |
Total power | 18kw | |
Total weight | 19.5T | |
Overall size | 6870*2398*2356mm (Not including the pedal) | |
Machine Introduction:
1. The extra feeder can do paper and corrugated board. Install the vacuum pump of BECKER.
2. At the middle of head install the monitor ,worker can easily see the back
3. Pre-paper pile design and special pneumatic bench can save much time
4. The non-stop sampling system can check the board accurate without stop the machine
Feeding and Collecting Part:
1.Additional brush wheels and pressing wheels for thin paper and corrugated board running.
2. Advance push and pull lay of registration can assure the die cutting precision
3. Rikko light front lay detection system prevent the slanting paper move in main body.
Main body:
1.Adopt automatic centralized lubricating system and setting main chain lubricating system by HMI
2.Patented design shock absorption system can prolong the life of main body and increase the pressure
3.The intermittent gearbox made in Taiwan can assure the accurate registration and decrease the gripper attack.
Die-cutting part and Delivery system:
1. Die-cutting chase fixed accurately by pneumatic lock system
2. Die-cutting plate is putted in and out by air floating device
3. Electric clutch system of main chain can assure the chain steady when it is stopped at high speed
4. Main chain and assist chain is lubricated periodically controlled by PLC
5. Protection window of die-cutting can hold the main body clean
Packaging & Delivery
Packaging Details:
We usually packed this machine covered by plastic film.
Delivery Detail:
Within 30 days after we got the deposit.
Copyright © Shandong Rino International Group All Rights Reserved. | Sitemap | Powered by 
