The Explanation Of The Operation Process Of The Die Cutting Machine

For many incorrect operations of the Semi-automatic Die-Cutting Machine, which will affect the product to varying degrees, it is necessary to explain to all operators to train the correct use and improve product quality.

The cutting point for the Semi-automatic die-cutting machine can be adjusted:

1. The work of the module is completed, it will cut the material in the plastic film, then the tool on the material, and then feed the board to advance the harvesting area.

2. Using both hands, press the die-cutting machine to cut the switch, and then cut the pressure roller die-cutting machine, die-cutting machine, and stop the material before automatically starting to recover position.

3. In the stamping material, if the material is found to be not completely cut, adjust the depth of cut controller, the die cutting machine will rotate the "pressure" system in the direction of twisting clockwise, and the knife will be molded into the plastic film too deep, it will. The "pressure system" is adjusted counterclockwise and then deep cut, trying to adapt the mold to a slightly pressed single date.

4, die-cutting Machine will pull the cutting area of the feeding plate, remove the material, thus completing a face stamping process. The die-cutting machine method is mainly used for continuous feeding, that is, there is always some overlap between the front and back sheets. This means smooth, fast, but the rapid adjustment of positioning before this article has a huge impact, the power of the paper roll or rebound, leading to positioning permission. The ideal die cutting machine cutting speed should ensure that the paper feed table moves at the same speed as possible at the same time. Secondly, the die-cutting machine chain guides the positioning and direction of the chain and the thickness of the rail to the right of the segment, which can be embedded in the chain. The distance between the upper and lower rails must ensure that the chain passes smoothly, too small, and increases driving resistance; it is too easy to beat the chain. The length of the chain has a certain impact on the performance of the rail machine, and these factors must be taken into account in this process.

We also have a Lead Edge Feeder Printing Machine for you, contact us, you can find out more about packaging equipment.